| Save 42% off on WiFi Smart Bulb, Infray B22 Bayonet 9W Smart Light Bulb Compatible with Alexa, Google Home and IFTTT, Colour Dimmable RGBW Smart LED Bulbs, 60W Equivalent Remote Controlled No Hub Required |
| Expires Nov 02, 2019 |
Specifications
Rated Power: 9W
Brightness: 900 lumens (60W Equivalent)
WiFi Type: 2.4GHz Only
Light Colour: RGBW
Voltage: AC100-240V 50/60Hz
Base Interface: B22
Color Temperature: 2700-6500K
Working Temperature: -20℃~40℃
Easy to Connect with Smart Life App
1. Download "Smart Life" app from Google Play or Apple App Store, and register with your email address/phone number.
2. Power on the smart bulb then turn it off for more than 5 seconds.
3. Use the manual switch to turn it on-off-on-off on (keep time interval not too short, turn off after light is on).
4. Confirm the light bulb is now rapidly flashing.
5. Follow the in-app instructions to complete the installation.
Please make sure the WiFi router set to 2.4GHz already before connecting.
Please set your internet to compatible mode if your WiFi Router supports 2.4GHz and 5GHz.
How to make the smart bulb flash rapidly? (EZ mode)
1. Connect the bulb to the power source.
2. Press the switch "on-off-on-off-on "continuously (Keep time interval not too short, turn off after the light is on).
3. Then the smart bulb will be flashing quickly.
Go on with Confirm light blinks rapidly.
How to make the smart bulb flash slowly? (AP mode)
1. Power on device, power off after 10s then power on again. 2. Turn on-off-on-off-on continuously.
3. When the bulb is flashing rapidly now, go to next step.
4. Operate again: On-off-on-off-on, then the bulb will be flashing slowly.
Go on with Confirm light blinks rapidly and connect with 2.4GHz wifi.
Rated Power: 9W
Brightness: 900 lumens (60W Equivalent)
WiFi Type: 2.4GHz Only
Light Colour: RGBW
Voltage: AC100-240V 50/60Hz
Base Interface: B22
Color Temperature: 2700-6500K
Working Temperature: -20℃~40℃
Easy to Connect with Smart Life App
1. Download "Smart Life" app from Google Play or Apple App Store, and register with your email address/phone number.
2. Power on the smart bulb then turn it off for more than 5 seconds.
3. Use the manual switch to turn it on-off-on-off on (keep time interval not too short, turn off after light is on).
4. Confirm the light bulb is now rapidly flashing.
5. Follow the in-app instructions to complete the installation.
Please make sure the WiFi router set to 2.4GHz already before connecting.
Please set your internet to compatible mode if your WiFi Router supports 2.4GHz and 5GHz.
How to make the smart bulb flash rapidly? (EZ mode)
1. Connect the bulb to the power source.
2. Press the switch "on-off-on-off-on "continuously (Keep time interval not too short, turn off after the light is on).
3. Then the smart bulb will be flashing quickly.
Go on with Confirm light blinks rapidly.
How to make the smart bulb flash slowly? (AP mode)
1. Power on device, power off after 10s then power on again. 2. Turn on-off-on-off-on continuously.
3. When the bulb is flashing rapidly now, go to next step.
4. Operate again: On-off-on-off-on, then the bulb will be flashing slowly.
Go on with Confirm light blinks rapidly and connect with 2.4GHz wifi.
0 comments :
Post a Comment